Which motor?

Discussion in 'Gun Building, Modifications & Repairs' started by LegacyAirsoft, Sep 16, 2012.

  1. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    I am finishing a build I have been working on for a while and I am down the the last part, the motor. I am deciding between the SHS High Torq and the Lonex A1 Red motors, but am open for suggestions. I want to know a couple main things:
    1. Which will give faster rof
    2. Which will run cooler
    3. Which will use mah more efficiently
    4. What's the rof difference between the SHS High Speed and Torq
    5. Any other motor suggestions
    6. Do u think I will be able to reach 20rps with the motor u think is best and these upgrades:
    Polycarb piston
    Lonex ball bearing piston head
    Guarder sp100 spring
    Shim
    Grease
    AOE Correction
    18:1 gears
    9.6v minitype tamiya battery
    (if u need more info on build just ask)
     
  2. Mystery43_4

    Mystery43_4 New Member

    1,307
    1
    Santa Barbara
    Lonex A1 for 1-3.
    4. Depends on build. Roughly 5-8 RPS difference on 18:1's, FET, and 11.1v.
    5. Lonex A1
    6. You should be right around 20RPS +/-.
     

  3. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    Thanks but I still need more suggestions!
     
  4. Lefse

    Lefse Well-Known Member Supporting Member

    4,746
    161
    You can't go wrong with a Lonex A1, it's an excellent motor. Lonex motors are considered to be among the best on the market and are very good value for the price you pay. I have two Lonex A2's and one Lonex A4 myself, and I love them, excellent motors. The A4 is pretty inefficient, but damn it's a fast little bugger, and the A2's have tons of torque and are very efficient.
     
  5. LegacyAirsoft

    LegacyAirsoft You can say I tech a little...

    6,146
    8
    Massachusetts
    This is the gun that I am deciding to get the motor for, thought id try to get more people to help :)
     

    Attached Files: