Airsoft Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
42 Posts
Discussion Starter · #1 · (Edited)
What would be the ideal distance to zero in an AEG? I'll be using this AEG for milsim.

AEG: http://www.airsoftgi.com/product/Sp...SRX-309-Carbine-AEG-Airsoft-Gun-By-VFC-20886/

next question - should AEGs and GBBR equivalents shoot around the same range? Asking this because I will be switching over to GBB in the near future.

last question - what kind of groupings should I be looking at for this AEG? (I know it depends on the distance) so tell me the range you think I should be shooting at and the groupings I should be getting at that range.

I'd appreciate any info.
 

· Registered
Joined
·
1,496 Posts
Zeroing the rifle depends on the field... If its an urban milsim then probably 25-50 feet zero. Outdoor woods milsim? Probably 75-100 feet.

I dont have any experience with that rifle so I cant say anything about the groupings. Range between GBB and AEG's that have the same fps will be about the same range.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top