My nozzle measures at 20.96mm which means a standard M4 is too long (21.4mm). I have a Lonex cylinder head and I found several "21mm" nozzles from Lonex that I think could be compatible and I can't see any differences between them. I'd order a direct replacement, but they've been sold out everywhere I have found for several months.
Do you know if nozzles are compatible between an M4 style cylinder head and the different gun models listed below?
The MC51 mentions V2 gearbox when I looked it up and some dude on reddit mentioned the G3-A3 uses V2 compatible parts six years ago. I think the first link is compatible, but I've only been at this for a month...it started with a spring change...
It looks like the nozzle is just supposed to push the BB's in and seal on the rubber lips of the hop rubber. Are there other dimensions I need to be concerned about?
Lonex POM G3-A3 / A4 / SG-1 / MC51 Air Nozzle
www.brillarmory.com
Lonex POM LMG Air Nozzle
www.brillarmory.com
Lonex POM PSG-1 Air Nozzle
www.brillarmory.com
It's for an ICS CXP MARS.II, but I assume this is not a popular gun so didn't get an answer.
Do you know if nozzles are compatible between an M4 style cylinder head and the different gun models listed below?
The MC51 mentions V2 gearbox when I looked it up and some dude on reddit mentioned the G3-A3 uses V2 compatible parts six years ago. I think the first link is compatible, but I've only been at this for a month...it started with a spring change...
It looks like the nozzle is just supposed to push the BB's in and seal on the rubber lips of the hop rubber. Are there other dimensions I need to be concerned about?
Lonex POM G3-A3 / A4 / SG-1 / MC51 Air Nozzle
BRILL ARMORY, Quality Airsoft parts for the discerning consumer.
BRILL ARMORY: Trigger Contacts Cut Off Levers Springs Spring Guides Selector Plates Pistons Piston Heads Motors Misc. Small Parts Hop-Up Parts Gears Cylinder Heads Bushings/Bearings Air Nozzles Tappet Plates Electrical Upgrades Shock Reduction Cylinders Accessories, Tools and Externals AEG...
www.brillarmory.com
Lonex POM LMG Air Nozzle
BRILL ARMORY, Quality Airsoft parts for the discerning consumer.
BRILL ARMORY: Trigger Contacts Cut Off Levers Springs Spring Guides Selector Plates Pistons Piston Heads Motors Misc. Small Parts Hop-Up Parts Gears Cylinder Heads Bushings/Bearings Air Nozzles Tappet Plates Electrical Upgrades Shock Reduction Cylinders Accessories, Tools and Externals AEG...
www.brillarmory.com
Lonex POM PSG-1 Air Nozzle
BRILL ARMORY, Quality Airsoft parts for the discerning consumer.
BRILL ARMORY: Trigger Contacts Cut Off Levers Springs Spring Guides Selector Plates Pistons Piston Heads Motors Misc. Small Parts Hop-Up Parts Gears Cylinder Heads Bushings/Bearings Air Nozzles Tappet Plates Electrical Upgrades Shock Reduction Cylinders Accessories, Tools and Externals AEG...
www.brillarmory.com
It's for an ICS CXP MARS.II, but I assume this is not a popular gun so didn't get an answer.
