I know I bought a problem child....
I recently took the Gearbox outside fo the outershell to reroute the battery wires slightly to make it easier to slide in the battery I am currently using. Upon intial reassembly I had an issue with being stuck on semi for both semi and full auto.
(context this gun has a magnet follower in the magazine and if you want to dry fire the gun you must hold the bolt release down and pull the trigger)
I think there might have been a issue with the fire selector's positioning so I took it back out and made some changes. Now the gun does not fire tradtionally sense, when in semi and full auto as soon as the bolt catch is pressed it fires in full auto.
There are a few things that i think might be the issue.
1. Tappet plate in the gearbox is broken
2. Trigger mircroswitch was broken during the process of assembly, it seem to look different from the picture i have seen online, if you wanted to purchase a replacement.
3. A short is happening with the bolt release casuing it to skip the actual tigger pull trigger and fire full auto. issues 2-3 might be related if the swtich is broken / or making perminent contact as if it was fire full auto which is what happens when i only press down the release.
Trigger Bar Internal
![Image]()
Internal Bolt release assembly
![Image]()
the point of the switch moves and im not sure if it is broken
![Image]()
It can be moved and is semi spring loaded
![Image]()
When moving the bolt down like this it will fire full auto, in both semi and full auto without pressing the trigger.
![Image]()
How a new microswitch looks
![Image]()
I recently took the Gearbox outside fo the outershell to reroute the battery wires slightly to make it easier to slide in the battery I am currently using. Upon intial reassembly I had an issue with being stuck on semi for both semi and full auto.
(context this gun has a magnet follower in the magazine and if you want to dry fire the gun you must hold the bolt release down and pull the trigger)
I think there might have been a issue with the fire selector's positioning so I took it back out and made some changes. Now the gun does not fire tradtionally sense, when in semi and full auto as soon as the bolt catch is pressed it fires in full auto.
There are a few things that i think might be the issue.
1. Tappet plate in the gearbox is broken
2. Trigger mircroswitch was broken during the process of assembly, it seem to look different from the picture i have seen online, if you wanted to purchase a replacement.
3. A short is happening with the bolt release casuing it to skip the actual tigger pull trigger and fire full auto. issues 2-3 might be related if the swtich is broken / or making perminent contact as if it was fire full auto which is what happens when i only press down the release.
Trigger Bar Internal
Internal Bolt release assembly
the point of the switch moves and im not sure if it is broken
It can be moved and is semi spring loaded
When moving the bolt down like this it will fire full auto, in both semi and full auto without pressing the trigger.
How a new microswitch looks
