Airsoft Forum banner

M4/M16 Gun Searching NEED HELP PLEASE ️

1.2K views 10 replies 8 participants last post by  ManchesterElite_JB  
#1 · (Edited by Moderator)
I am currently looking for a M4 or M16, Price range is about a little under $250, Anyone know some really good guns that are good to start off with from evike? thank you right now im searching i just want to see your view on whats a good gun that can help me alot.

I was looking at this.
 

Attachments

#2 ·
#3 ·
#5 ·
I have a g&g cm16 raider...very great gun. Only $180 for gun battery and charger. It's very accurate from 70 ft away. I would always recommend this gun. Hope that helped![emoji2]
To be honest his budget is allowing for much higher quality products, to buy a CM would be impractical at best.
 
#7 ·
I only said it cause that's basically the gun he was looking at in the picture soooo...
...not really...it's not even the same brand.

By that logic I could link a Walmart LPEG that looks like a full size m4-that wouldn't make much sense.
 
#9 ·
It depends on what you want. If you would like a good platform that you might want to upgrade in the future I would recommend a Lonex M4 or JG M4. I own a Lonex and it has had minor upgrades installed (barrel, bucking, mosfet) and am currently running it at a comfy 24rps on an 11.1 lipo. If you would just like a reliable gun that won't fail you, but won't take to upgrading quite as well, then I would recommend a KWA. This might be an unpopular choice, but KWA has great customer service and are known to last for ages as long as you take care of them(As with any gun). They are NOT the greatest AEG to ever exist, but they will do a good job at what they do. Hope this helps :)
Oh one last thing: I can not recommend getting a MOSFET and Deans wiring enough. They are GREAT and don't cost much.
 
#10 ·
Definitely look at G&G combat machine sires. Or, you could buy $250 worth of Bacon, and call it a day